What we do: We inspect the lift’s cables, pulleys, motors, and supports for wear, corrosion, or misalignment.
Why it matters: Ensures smooth and safe raising/lowering—preventing damage to your boat and marine lift.

What we do: We inspect the hull visually and manually, looking for cracks, blisters, gouges, and missing gelcoat.
Why it matters: Early damage detection prevents structural issues that can compromise safety or lead to leaks.

What we do: We inspect all docklines for chafe, wear, brittleness, and proper knot and cleat engagement.
Why it matters: Secure mooring reduces drift or sudden stress, protecting both your boat and neighboring vessels.

What we do: We inspect propeller blades for bends, nicks, corrosion, and ensure proper shaft alignment.
Why it matters: A sound prop delivers efficient thrust and prevents vibration that can harm the drivetrain.

What we do: We test railings, stanchions, welds, fasteners, and ensure secure attachment to the deck.
Why it matters: Provides essential passenger safety, especially in rough waters or during boarding.

What we do: We evaluate the gelcoat and painted surfaces for signs of oxidation, chalking, or fading.
Why it matters: Keeps your boat looking sharp and protects surfaces from long-term UV and salt damage.

What we do: We look for soft spots, hairline cracks, lifts in non-skid, and delamination.
Why it matters: Prevents structural failure underfoot and maintains safe walking surfaces.

What we do: We inspect teak decking and trim for splits, mildew, loose caulking, and correct bedding.
Why it matters: Well-maintained teak ensures longevity, appearance, and watertight integrity.

What we do: We inspect hydraulic hoses, fluid level, leaks, and steering cylinder function.
Why it matters: Reliable steering is critical for safe maneuvering and response at sea.

What we do: We check battery charge levels, terminal corrosion, secure mounts, and cable connections.
Why it matters: Reliable batteries are the foundation of all electrical systems—starting, navigation, and safety gear.

What we do: We inspect fuel, oil, air, and water filters for clogs, deterioration, or overdue replacement.
Why it matters: Clean filters keep your engine and onboard systems running smoothly and efficiently.

What we do: We check separators for trapped water, proper drainage, and contamination signs.
Why it matters: Prevents water from reaching your engine—avoiding stalling, damage, and costly repairs.

What we do: We review engine hours, service logs, and maintenance markers.
Why it matters: Keeps your vessel on schedule for required upkeep—protecting warranties and performance.

What we do: We start engines dockside to observe startup, idle quality, exhaust, and noise levels.
Why it matters: Helps identify issues like misfires, cooling problems, or unusual vibrations early.

What we do: We test throttle and joystick systems for responsiveness, stickiness, or electronic lag.
Why it matters: Smooth controls are essential for docking, maneuvering, and emergency response.

What we do: We flip and test every switch—lights, pumps, accessories—to confirm function and labeling.
Why it matters: Ensures you know what works and what needs fixing before you're out on the water.

What we do: We test the bow thruster's power, delay, and direction while docked.
Why it matters: Confirms your ability to make tight moves in wind or current situations.

What we do: We test hydraulic or electric trim tabs for function, motor sound, and fluid leaks.
Why it matters: Helps stabilize your boat while cruising—improving ride comfort and fuel economy.

What we do: We test underwater lighting systems for functionality, brightness, and lens condition.
Why it matters: Enhances safety at night and adds ambiance; faulty lights can short other systems.

What we do: We inspect the hull, running gear, and intakes for barnacles, algae, or marine growth.
Why it matters: Growth causes drag, reduces fuel efficiency, and can damage intakes or sensors.

What we do: We test the fuel transfer pump for pressure, flow rate, leaks, and proper electrical function.
Why it matters: Ensures fuel moves reliably between tanks or engines—critical for range and performance.

What we do: We activate all bilge pumps, checking float switch operation, flow strength, and discharge paths.
Why it matters: Your last line of defense against flooding—must work flawlessly when needed.

What we do: We manually test float switches for free movement and reliable pump activation.
Why it matters: Faulty float switches won’t trigger the bilge pump, risking water intrusion and damage.

What we do: We test the horn for tone, volume, and electrical continuity.
Why it matters: Essential for alerting other boaters—meets legal sound signal requirements.

What we do: We test VHF radios for signal clarity, transmission, and power on both high and low settings.
Why it matters: Ensures you can communicate with marinas, bridges, and emergency services.

What we do: We verify all gauges—RPM, fuel, trim, engine temp, voltage—are reading accurately.
Why it matters: Trustworthy data helps you monitor engine health and avoid surprise failures.

What we do: We test navigation lights for brightness, correct color, and placement.
Why it matters: Keeps you compliant with boating laws and visible during low light conditions.

What we do: We inspect the transom area, swim platform, and any lifts for cracks, fastener integrity, and hydraulic motion.
Why it matters: Ensures safe boarding and stable tender operations—common stress points on boats.

What we do: We test davits or cranes for hoisting function, cable wear, and remote/hand controls.
Why it matters: Safely lifting dinghies or PWCs depends on reliable gear with no frayed lines or skipped pulleys.

What we do: We inspect the windlass motor, foot switches, chain movement, and clutch function.
Why it matters: Ensures your anchor deploys and retrieves smoothly—vital for safe mooring.

What we do: We verify the presence and condition of flares, throwable devices, fire extinguishers, liferafts, and TSIRP kits.
Why it matters: Emergency gear must be onboard, accessible, and in-date to keep you compliant and safe.

What we do: We flush engines using fresh water to remove salt, sand, and grime from cooling systems.
Why it matters: Prevents corrosion and extends engine life—especially critical for boats used in saltwater.

What we do: We check engine oil levels and condition for each motor, looking for low levels or contamination.
Why it matters: Proper oil prevents engine wear and overheating—key to reliable operation.

What we do: We test freshwater pumps, showerheads, and plumbing lines for pressure, leaks, and clogging.
Why it matters: Comfort features rely on working pumps—plus it prevents unnoticed water leaks or failures.

What we do: We test the blower fan for effective fuel vapor removal in engine spaces.
Why it matters: Reduces the risk of explosive fumes accumulating before engine start.

What we do: We inspect fuel filler caps for cracked seals, loose threads, and missing gaskets.
Why it matters: A tight seal prevents fuel vapors from escaping and water from entering the tank.

What we do: We examine the T‑Top structure—bolts, welds, and frame mounts—for movement or corrosion.
Why it matters: Secure T‑Tops are essential for safety, especially underway or in rough water.

What we do: We inspect fuse blocks and terminals for signs of corrosion, moisture, or heat damage.
Why it matters: Corroded panels lead to electrical failures—this step keeps everything powered and protected.

What we do: We inspect the shaft seal or stuffing box for leaks, drip rate, and proper adjustment.
Why it matters: Shaft leaks can flood the bilge and damage gear—tight seals keep your boat dry and safe.

What we do: We inspect canvas zippers, vinyl windows, and snaps or fasteners for function and wear.
Why it matters: Ensures your covers and enclosures protect properly and are easy to deploy or remove.

What we do: We inspect outriggers for straightness, pivot points, locking mechanisms, and rigging tension.
Why it matters: Prevents gear failure during trolling and keeps your spread consistent and safe.

What we do: We check for corrosion, looseness, and alignment of rod holders across the vessel.
Why it matters: Protects rods during runs and ensures readiness for serious fishing.

What we do: We test baitwell pump flow, plumbing seals, and switch function.
Why it matters: Keeps live bait healthy and oxygenated—critical for successful fishing trips.

What we do: We test the fish box macerator or pump for drainage, leaks, and proper discharge.
Why it matters: Prevents standing water and odor; essential for keeping your catch fresh.

What we do: We inspect washdown system pressure, hose condition, and nozzle spray.
Why it matters: Ensures quick and effective cleanup of decks, fish mess, and gear after use.

What we do: We test seat mounts, swivel functions, and frame integrity.
Why it matters: Loose or unstable seating poses safety risks and detracts from ride comfort.

What we do: We check deck hatches, storage doors, and latches for closure strength and ease of use.
Why it matters: Keeps gear secure and prevents hatches from slamming or opening underway.

What we do: We examine seating vinyl for UV damage, cracking, mildew, and seam separation.
Why it matters: Maintains comfort and aesthetics—damaged vinyl wears quickly and absorbs water.

What we do: We inspect fuel hoses for dry rot, softness, and leaks at connections or clamps.
Why it matters: Prevents fuel leaks that can be dangerous and ensures a sealed, efficient fuel system.